The Merced Wing Chair brings old world style into the 21st century. The wing chair is as timeless as the little black dress, but this one takes it a new direction with an exposed wood detail on the back. The exposed wood gives it a modern, deconstructed feel that's still very elegant. Your choice of fabrics, nails, and wood finish can make it feel more traditional or modern to suit your room style and and personal taste.
The Silverado Merced Wing Chair with Exposed Wood, made by Lexington,
is brought to you by Johnny Janosik. Johnny Janosik is a local furniture store, serving the Delaware, Maryland, Virginia, Delmarva area. Product availability may vary.
Contact us for the most current availability on this product.
Exposed Wood Leg
Tapered Leg
Attached Back
Nailheads
remove
Features
remove
Specifications
Style Elements
Custom Options
Custom Fabrics or Leathers
Custom Options
Custom Finishes
Leg / Base Type
Exposed Wood Leg
Leg / Base Type
Tapered Leg
Seat Back Style - Upholstery
Wing Back
Design Style
Transitional
Fabric Options
Hundreds of fabric and leather choices available to special order.
Arm Type - Upholstered
Scoop Arm
Back Cushion
Attached Back
Dimensions
Depth (front to back)
34" D
Seat Depth
23.5"
Arm Height
24.5"
Width (side to side)
33.5" W
Seat Height
18"
Height (bottom to top)
44" H
Seat Width
22.5"
Construction & Materials
Seat Support
Stretch web construction is strips of 2-inch wide elasticized webbing stretched and interlaced from front-to-back
and side-to-side in the seating area of the frame. These strips are covered with a 1/2-inch seat pad material
before the seat fabric is applied.
Origin
Made In the USA
Frame Construction
To maximize the yeild and quality traits of this natural resource, wood is cut into smaller depths and layered
perpendicular to criss-cross the grain and add strength and rigidity. The glue is applied evenly between the slices,
then pressure is applied to ensure the glue is absorbed into the pores and cures to become a solid hardwood blank.
The layered hardwood blanks come in various depths, we use 7/8-inch, 1-inch, and 23/32 inches. Depending on
the frame requirements, two blanks may be glued together to make the finish depth requirement.
Layered hardwood is ideal for areas of the frame that will be covered by foam padding before fabric or leather
upholstery is applied, which provides strength and rigidity of the final product. The front rails, back rail, and top
rail are hardwood solids, purposely placed at the load beraing areas of the frame. And solid wood blanks are used
to ensure the intricacies of the carving details and/or machining requirements, and to highlight the wood grain
visibility once finished. To ensure a strong frame, the joints must fit snuggly wherein the glue cures to make a
single unit.
Padding & Ergonomics
The Ultra Down Cushion is comprised of a foam core wrapped with an extra soft foam layer, and sewn into a ticking filled with a luxurious blend of polyester fibers and
down/feather mixture. The down-proof
ticking is channeled to keep fibers and
feathers evenly dispersed.